When you go away with your family members for a holiday for some days and you leave your house unattended, probably you are worried if an intruder gets into the home and steals your important belongings. Commonly you install such sort of CCTV camera to enable you monitor the residence in a actual time or you can replay the records later.
The problem will exist when you are away from the house and nobody takes care of it, how can you view the camera remotely? Actually the technology has been around for years. Airlink with its lines of wireless network security camera (with the newest firmware update) makes it possible for you to view the camera from your iPad, iPhone or iPod anytime, anyplace whenever the internet is readily available and accessible. With this way, you can feel safe and if you come across some thing wrong for instance an intruder gets into the house for stealing, at least you can call the security in charge in your neighborhood or call the police reporting a burglary try.
The Needs
How can you implement this technique? Firstly you need to have a wireless network environment in place. The wireless network ought to operate in 2.4GHz frequency band, or any dual band environment (two.4GHz and 5GHz bands) can be utilised as effectively. The network ought to have a broadband World wide web connectivity as the gateway for a remote access. Need to you build the network from the starting, you can consider purchasing the wireless router from the exact same manufacturer in order to get technical support from the same location. For instance you can install Airlink wireless N300 gigabit router.
Installation and Configuration
Assuming that you have completed the installation of your wireless network and is currently operational, the subsequent step is to connect the wireless network security camera to the network. Use the UTP network cable and connect a single finish to one particular of the Ethernet port of the router and the other finish to the Ethernet port of the camera. Power-on the camera and verify that yellow light (the power light) is solid and the green light (the Link) is blinking.
The subsequent step is installing the software program (SkyIPCam Utility) to your personal computer. This utility is employed to configure the camera including configuring the camera IP address, changing the admin password and other networking tasks. You need to have to run the software from one of your computers that connect to the network. For detail installation and configuration, you should follow the Quick Installation Guide document. Up to this point, your camera is ready and connects to the network wirelessly and is operational. You can manage the camera from your personal computer wirelessly.
The final step is to configure your iPhone to be capable of viewing the camera remotely by way of the world wide web. You need to download the SkyIPCam application from iTune Retailer for cost-free. Follow the installation guideline document to complete the installation and configuration steps. That’s all you can now monitor and view your security camera from your iPad, iPhone or iPod anytime anywhere wherever the world wide web is readily available and is accessible.